Lockwood ES200 E/STRIKE 12VDC FAIL SAFE NON MONITORED

The ES200 series electric strikes are high security products manufactured from stainless steel and designed for use with all access control systems. The strikes are suitable for use with hinged doors which require either fire or security control as part of a building management system. These strikes are flexible and can be changed from fail safe to fail secure, mounted on the left or right hand side of the door and are available in 12 or 24Vdc. They offer a strong, dependable and long-lasting electric strike solution. Features: Fail safe/fail secure changeable on site High security 4 Hour fire rating 850kg holding force 1 million cycles endurance rating Cast stainless steel body Stainless steel locking pins Low Current consumption - Max 175mA @12Vdc Mounting kit supplied as standard TRICARE? 5 Year Warranty Applications: High traffic areas Fire rated door sets Open in/open out doors Suitable for use with all access control systems Standards and Compliance: S3 (Security) Australian Lock Standard (AS4145.2.1993) D3 (Durability) Australian Lock Standard (AS4145.2.1993) BS 5872 Approved Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets) Approved to UL1034 (highest level) CE Approved C-Tick Certified Specifications: Voltage: 12Vdc Current: 175 mA @ 12Vdc Solenoid: Solenoids are rated for continuous use. Monitoring: None Holding Force: 850kg Static Strength Rating Endurance: Cycle tested to 1,000,000 operations Latch: Suitable for 15mm latch bolt with 3mm door gap Environment: Operational temperature range -20?C to +60?C Body: Solid Stainless Steel Construction Keeper: Stainless Steel Specification Statement: The strike should be constructed of stainless steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. The one strike must be changeable from fail safe to fail secure on site where required. The strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use. Certifications must include CE, C-Tick and 4 hr fire rating.