Build an HPE ProLiant server option by option: processors, memory, drive bays, drives, RAID, network and power, checked against HPE's rules, with a parts list to send for a quote.
HPE Server Builder
Build an HPE ProLiant server option by option: processors, memory, drive bays, drives, RAID, network and power, checked against HPE's rules, with a parts list to send for a quote.
Short-depth 1U single-socket entry server for small sites, branch offices and small CCTV recorders with up to 2 LFF or 6 SFF drives.
Cheapest chassis. Drives run only on the built-in Intel VROC SATA RAID: no tri-mode controllers and no OCP or PCIe controller cable kits. Uses the non-hot-plug LFF drives. An optical drive is possible with the 2LFF ODD kit.
Processor and memory
Unbuffered ECC UDIMMs only (no RDIMM or LRDIMM). There are 4 slots in 2 channels of 2 DIMMs, for a maximum of 128GB (4 x 32GB). HPE recommends 1, 2 or 4 DIMMs. A channel needs DIMMs of the same size and mixing sizes is not recommended, so the builder keeps to one part. Speed is 4400 MT/s at 1 DIMM per channel. At 2 per channel it drops to 4000 MT/s (16GB) or 3600 MT/s (32GB). Fill the slots in the
Drive bays
This chassis has its bays built in.
Drives
No drives yet. Add the drives for recordings or data; boot drives are chosen below.
Storage and boot
Standard on every chassis, SATA only. The customer turns it on in BIOS because it cannot be set at the factory. It needs UEFI boot and does not support VMware. A volume cannot span drive form factors or cages. The Windows and Linux drivers come from HPE support, not from the SPP.
Network cards
The server's own management port is always included. Add network cards for cameras and users.
Power and extras
One or two supplies of the same part, never mixed. Two Flex Slot PSUs of the same part give 1+1 redundancy. The 290W option is a single, non-redundant supply fitted at the factory only. Order it as P45476-B21 plus the ATX kit P65409-B21 (one of each, as a single choice). Standard Features also names P21649-B21 (the DL20 Gen10 290W) and the pre-configured models ship with it, but the CTO step does
Kits and cables (1 chosen)
Kits your choices call for are ticked. HPE's own configurator confirms the exact cables when we quote.
Your server
Server: HPE ProLiant DL20 Gen11
Raw storage: 0 TB on 0 drives
Estimated power draw: about 195 W
This build passes the rules we check. HPE's configurator checks it again when we quote.
Parts list
Chassis: 1 x P65390-B21 2 LFF non-hot-plug CTO chassis
Paste the parts list into your message and we'll price it. Options are from HPE's QuickSpecs (Version 29, 05-Oct-2026), checked weekly. Need help with drive sizes? Try the CCTV storage calculator.
HPE's configuration rules for the ProLiant DL20 Gen11
One processor only; it is required. Xeon E-2400 option kits are no longer orderable (removed in Version 28).
Memory: 1, 2 or 4 UDIMMs of one size; 16GB or 32GB; max 128GB. Two DIMMs per channel slows memory (4000 MT/s with 16GB, 3600 MT/s with 32GB).
At least one riser is mandatory: add P52753-B21 (x16 FHHL riser) to every build.
Only one PCIe card in total: a PCIe NIC, the MR216i-p controller, the E208e-p controller or a GPU, not two of them.
Only one OCP NIC; it needs the External OCP cable kit P65411-B21.
The OCP storage controllers (MR216i-o, MR408i-o) use the internal OROC slot and can sit alongside an OCP NIC; they need the 2LFF/4SFF OCP cable kit P65412-B21.
The MR216i-p PCIe controller needs the 2LFF/4SFF PCIe cable kit P65413-B21.
Pick at most one internal storage controller (MR216i-o, MR408i-o or MR216i-p); without one, drives run on built-in VROC SATA RAID.
SAS drives need a tri-mode controller; VROC handles SATA only.
2 LFF non-hot-plug chassis (P65390-B21): VROC SATA only, no tri-mode controllers and no controller cable kits; use the non-hot-plug LFF drives (801888-B21, 801882-B21).
The 2 LFF hot-plug chassis takes the LFF low-profile-carrier drives; the 4 SFF chassis takes SFF drives only.
The 2SFF kit P65406-B21 is for the 4 SFF chassis only, takes it to 6 bays, and cannot be combined with an optical drive.
With the 2SFF kit and a controller, add the matching 2SFF cable: P65414-B21 for MR216i-p, P65415-B21 for MR216i-o, P65416-B21 (4SFF/2SFF x1 OCP cable) for select other OCP controllers. Confirm the exact cable in OCA.
NVMe U.3 drives: maximum 2 per server, only with the 2SFF kit P65406-B21 (so 4 SFF chassis only) and a tri-mode controller (controller need is our reading, confirm in OCA). HPE advises under 25C ambient or the fans get loud.
SAS 24G SSDs run at 12G in the 4 front SFF bays and in the LFF chassis; they reach full 24G only in the 2SFF add-on bays.
M.2 NVMe SSDs need the serial/iLO/M.2 enablement kit P65407-B21 and are not handled by the Smart Array/MR controllers.
The NS204i-u boot device P48183-B21 must be ordered with its cable kit P65410-B21.
A dedicated iLO network port also needs P65407-B21; otherwise iLO shares embedded NIC port 1.
The MR408i-o (cached) should have the 96W storage battery P01366-B21; max one battery per server.
Power supplies: 1 or 2 of the same part. Redundancy only with two Flex Slot PSUs. The 290W PSU is single, factory-only, and needs P65409-B21 as well as P45476-B21.
Optical drive: a SATA DVD (726536-B21 / 726537-B21) on the 4 SFF chassis needs P65417-B21 (direct attach) or P65418-B21 (when an internal controller is fitted); on 2 LFF it needs P71917-B21. The USB DVD-RW 701498-B21 needs no kit.
The bezel lock 875519-B21 needs the 1U bezel P50450-B21. Intrusion detection is P48922-B21.
A GPU (RTX A400 S7K99C or A1000 S5T74C) uses the single PCIe slot and disables the iLO video port.
Factory builds use the -F21 memory parts; -B21 parts are for later upgrades. Many options are FIO (factory only), so the build must start from a CTO chassis.
The embedded 4 x 1GbE (BCM5719) is standard; SR-IOV is not supported on this server.
Max raw capacity guide: 2 LFF hot-plug HDD 40TB (2 x 20TB); 2 LFF non-hot-plug 8TB; 6 SFF up to about 122TB with NVMe in the 2 add-on bays.
Base warranty is 3 years parts, labour and onsite next business day; Tech Care adds to this.
HPE and ProLiant are trademarks of Hewlett Packard Enterprise. Prices are not shown; we quote each build.
Building a bigger job?Add these figures to a project, then add results from any of the other calculators. The project becomes one report you can save as a PDF and import again later to make changes.
Choose a server and chassis, then each option. The options, part numbers and rules come from HPE's published QuickSpecs, which we check every week. The builder checks memory per processor, drives against the bays and controller, card slots and power, and lists the kits your choices need. It shows no prices: send the parts list and we quote it, checked in HPE's own configurator. Dell PowerEdge is coming next.
Not sure what to enter, or what the result means? , our AI support assistant.
Free tools from Teracom Solutions
Worked it out? We can build it.
Teracom Solutions designs, supplies, installs and monitors CCTV, alarms, access control, intercoms, networks and AV for businesses. Send us your HPE Server Builder results and we will quote the job, free.